tlcr5200, TLCY5200 www.vishay.com vishay semiconductors rev. 1.4, 24-apr-13 1 document number: 81354 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrabright led, ? 5 mm untinted non-diffused package description the tlc.52.. series are a clear, non-diffused 5 mm led for high end applications where supreme luminous intensity required. these lamps with clear untinted plastic case utilize the highly developed ultrabright alingap (as). the lens and the viewing angle is optimized to achieve best performance of light ou tput and visibility. product group and package data ? product group: led ?package: 5 mm ? product series: power ? angle of half intensity: 15 features ? untinted non-diffused lens ? utilizing ultrabright allngap (as) ? high luminous intensity ? high operating tempreature: t j (chip junction temperature) up to 125 c for allngap devices ? luminous intensity and color categorized for each packing unit ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? interior and exterior lighting ? outdoor led panels ? instrumentation and front panel indicators ? central high mounted stop lights (chmsl) for motor vehicles ? replaces incandescent lamps ? traffic signals ? light guide design note (1) driving the led in reverse direction is suitable for a short term application 19223 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. tlcr5200 red 1350 4000 - 50 611 616 622 50 - 2.1 2.7 50 allngap on gaas TLCY5200 yellow 1350 4000 - 50 585 590 597 50 - 2.1 2.7 50 allngap on gaas absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? tlcr5200, TLCY5200 parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current t amb ? 85 c i f 50 ma surge forward current t p ? 10 s i fsm 1a power dissi pation p v 135 mw junction temperature t j 125 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 300 k/w
tlcr5200, TLCY5200 www.vishay.com vishay semiconductors rev. 1.4, 24-apr-13 2 document number: 81354 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. ? 2.0 note (1) in one packing unit i vmax. /i vmin. ? 2.0 ? note ? luminous intensity is tested at a current pulse duration of 25 ms. the type numbers represent the or der groups which include only a few brightness groups. only on e group will be shipped on each bag (there will be no mixing of two groups on each bag). ? in order to ensure availability, single brightness groups will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wave length groups will be shipped in any one bag. ? in order to ensure availability, single wavelength groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tlcr5200, red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma tlcr5200 i v 1350 4000 - mcd dominant wavelength i f = 50 ma ? d 611 616 622 nm peak wavelength i f = 50 ma ? p - 622 - nm spectral bandwidth at ? 50 % i rel max. i f = 50 ma ?? -18-nm angle of half intensity i f = 50 ma ? - 15- deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf -- 3.5-mv/k temperature coefficient of ? d i f = 50 ma tc ? d -0.05-nm/k optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? TLCY5200, yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma TLCY5200 i v 1350 4000 - mcd dominant wavelength i f = 50 ma ? d 585 590 597 nm peak wavelength i f = 50 ma ? p - 593 - nm spectral bandwidth at ? 50 % i rel max. i f = 50 ma ?? -17-nm angle of half intensity i f = 50 ma ? - 15- deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf -- 3.5-mv/k temperature coefficient of ? d i f = 50 ma tc ? d -0.1-nm/k luminous intensity classification group light intensity (mcd) standard min. max. ff 1350 2700 gg 1800 3600 hh 2400 4800 ii 3200 6400 kk 4300 8600 ll 5750 11 500 mm 7500 15 000 nn 10 000 20 000 pp 13 500 27 000 qq 18 000 36 000 rr 24 000 48 000 ss 32 000 64 000 tt 43 000 86 000 uu 57 500 115 000 color classification group dom. wavelength (nm) yellow red min. max. min. max. 0 585 588 1 587 591 611 618 2 589 594 614 622 3 592 597
tlcr5200, TLCY5200 www.vishay.com vishay semiconductors rev. 1.4, 24-apr-13 3 document number: 81354 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative intensity vs. wavelength fig. 3 - relative intensity vs. angular displacement fig. 4 - relative intensity vs. wavelength fig. 5 - forward current vs. forward voltage fig. 6 - relative luminous flux vs. forward current 0 10 20 30 40 50 60 0 20 40 60 80 100 120 t amb - ambient temperature (c) 16710 yellow red i f - forward current (ma) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 570 590 610 630 650 670 - wavelength (nm) 16007 i rel. - relative luminous intensity red 17534 0.4 0.2 0 0.2 0.4 0.6 0.6 0.9 0 30 10 20 40 50 60 70 80 1.0 0.8 0.7 i v rel - relative luminous intensity 0 0.2 0.4 0.6 0.8 1.0 1.2 540 560 580 600 620 640 - wavelength (nm) 16008 i v rel. - relative luminous intensity yellow 0 20 40 60 80 100 1.5 1.7 1.9 2.1 2.3 2.5 v f - forward voltage (v) 15974 i f - forward current (ma) red yellow 0.01 0.1 1 10 1 10 100 i f - forward current (ma) 15978 i v rel - relative luminous intensity red
tlcr5200, TLCY5200 www.vishay.com vishay semiconductors rev. 1.4, 24-apr-13 4 document number: 81354 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative lumino us flux vs. forward current ? ? ? package dimensions in millimeters 0.01 0.1 1 10 1 10 100 i f - forward current (ma) 15979 yellow i v rel - relative luminous intensity 14339 (4.3) 12.1 0.3 a c 35.1 0.55 < 0.7 1.1 0.25 0.5 + 0.15 - 0.05 ? 5 0.15 2.54 nom. 0.5 + 0.15 - 0.05 ? 5.8 0.15 8.7 0.3 7.7 0.15 1 min. r 2.49 (sphere) drawing-no.: 6.544-5258.07-4 area not plane specifications according to din technical drawings issue: 4; 19.05.09
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
